Snorkel AB46RT-sn10000 - Manual (Page 9)

Pre-Operation Safety Inspection
AB46RT – 0260228 7
Pre-Operation Safety Inspection
Note
Carefully read, understand and follow all safety rules,
operating instructions, labels and National Safety Instruc-
tions/Requirements. Perform the following steps each
day before use.
1. Open the turntable covers and inspect for damage,
fluid leaks or missing parts.
2. Check the level of the hydraulic fluid with the platform
fully lowered. The fluid level must visible in the sight
glass. Add recommended hydraulic fluid if necessary.
See “Specifications” on page 18.
3. Check that the engine oil and coolent levels are cor-
rect.
4. Check that all guardrails are in place and all fasteners
are properly tightened.
5. Inspect the machine thoroughly for cracked welds
and structural damage, loose or missing hardware,
hydraulic leaks, damaged control cable and loose
wire connections.