beautypg.com

Warning, Caution – Snorkel AB46RT-sn10000 User Manual

Page 15

background image

Operation

AB46RT – 0260228

13

Emergency Lowering

A

Warning

If the platform should fail to lower, NEVER climb down
the elevating assembly.

Stand clear of the elevating assembly while operating
the Emergency Power System.

The emergency power system can be used to operate
the machine from the lower or upper controls.

A

Caution

The emergency power system is for emergency low-
ering and stowing only. The length of time the pump
can be operated depends on the capacity of the bat-
tery. Do not use this system for normal operation.

Only use the emergency power system if the main power
system fails.

Lower Controls
Use the following procedure to operate the machine using
the emergency power system from the lower controls.

1. Place the battery disconnect switch in the on posi-

tion.

2. Place the key in the start switch and turn the start

switch to the on position.

3. Pull the emergency stop button outward.

4. Place the controls switch in the lower control posi-

tion.

5. Hold the ground operation switch in the on position

while holding the engine/emergency power switch in
the emergency power position.

6. Hold the appropriate function toggle switch in the

desired direction.

Upper Controls
For the upper controls to be operational:

The battery disconnect switch must be in the on
position.

The start switch at the lower controls must be turned
on.

The emergency stop button at the lower controls must
be in the on position.

The control selector switch at the lower controls must
be in the platform position.

Use the following procedure to operate the machine using
the emergency power system from the upper controls.

1. Pull the emergency stop button outward.

2. Turn the start switch on.

3. Step down on the platform foot switch.

4. Hold the engine/emergency power switch in the

emergency power position.

5. Hold the appropriate function toggle switch in the

desired direction.

After Use Each Day
1. Ensure that the platform is fully lowered.

2. Park the machine on a firm level surface, preferably

under cover, secure against vandals, children and
unauthorized operation.

3. Turn the Chassis Key Switch to OFF and remove the

key to prevent unauthorized operation.