Lukas LS Series Cutter - Manual (Page 6)

6
5.5 Inspection and replacement intervals of hoses
- After each operation the hoses have to be checked for external damages, cracks,
kinks and bubbles!
- The operator has to replace the hoses in appropriate period of times, even if there are no
visible security defects on the hoses.
- The hoses have to be replaced 10 years as from date of manufacture at the latest
(see marking on the hose)!
Hoses are subject to a natural aging even if they are stored correctly. Therefore, their storage
and service time is limited.
- Hoses have to be checked by a skilled person before the first putting into operation
of the technical device and afterwards at least once a year for their safe working
condition.
A skilled person is somebody having sufficient knowledge concerning hydraulic hoses due to his
special training and knowledge. He/she must be acquainted with the local safety working
conditions, accident prevention regulations, technical regulations and approved standards (e.g.
DIN-Standards), so that he/she is capable to estimate the safety working conditions of the
hydraulic hoses.
5.6 Examples for possible defects of hoses
- Damages of the surface and the interior (e.g. chafe marks, cuts or fissures).
- Embrittlement of the surface (fissuration of the hose material).
- Deformations, which are not in accordance with the natural shape of the hoses, in pressureless
condition or under pressure or in case of bendings, e.g. separation of material layers, blister
formation, squeezing or break spots.
- Leakage points.
- Instructions for installation were not observed.
- Emerging of the hose from the end fittings.
- Damages or deformations of the end fittings which deteriorate the function and stability of the
end fittings or the connection between hose and end fitting.
- Corrosion of the end fittings or the metal inlets, which deteriorates the function and stability.
- Storage and operation periods were exceeded.
6 Intended use
LUKAS cutters LS are specially designed for rescuing casualties in case of accidents within road,
rail- or air traffic. Their main purpose is to free injured people after traffic accidents by cutting open
door hinges, door struts, roof struts or steel plates.
The tools are suitable for submerged operation in water up to a depth of 40m.
7 Function and performance
7.1 Description
The devices are designed in such a way that a hydraulically actuated piston via mechanical joints
symmetrically closes two identical blade arms positioned opposite each other to cut the object in
question. The blade geometry is adapted to the application so as to avoid as for as possible a
sliding of the material to be cut.