Road Armor 2005-2011 Toyota Tacoma Front Bumper - Manual (Page 3)

Trim any excess plastic if necessary
STEP 3:
• Install headlight stiffener below both headlights.
• If guarded : Wrap corners
with soft material to protect
fenders from scratching.
• Measure between bracket
holes and position bumper
bolts for easy alignment.
• Carefully guide bumper onto
brackets and tighten once
bumper is adjusted.
• Basque in glory. Congratulations!
Time for a cold one!
STEP 4:
• Install one bolt in Road
Armor bumper per side
using retainer clips as
pictured to the right.
• Use a small socket to
help push the retainer
clips all the way onto
the bolt.