Road Armor 2015 Chevy 2500 Front Bumper - Manual (Page 4)

Step 6: On the New Road Armor bumper install 1 bolt tab per side with a retainer clip
Step 7: Install and align bumper with 1 bolt per side at first. Tighten the brackets down all the way
Step 11: Trim inner fender well liner making sure not to cut off where it bolted. Tuck into the bumper
and bolt it in using factory hardware.
Step10: Install bumper with supplied hardware.
Step 8: Remove the bumper and drill a 1/2” hole through the frame 2.25” above the bolts from center.
Paint any surface with bare steel. Install factory tow hook bolts.
Step 8
Step 8
Step 9: Install winch, lights, logos and sensors/wiring into the bumper.
Step 11
Step 11
Enjoy Road Armor on your Rig