Road Armor 2010-2014 Ford Raptor Front Bumper - Manual (Page 5)

Step14: Now mount the bumper with the supplied 1/2” hardware, making sure the bumper is centered and tight.
Leave a minimum of 3/8” clearance under fenders.
Step13: Install (4) 1.75” and (4) 1.5” mounting bolts with retainer clips. This will help guide the bumper into place
while mounting to the vehicle.
Step 15
Enjoy your new Road Armor Bumper
Step 16
Step15: Mount winch, be sure to re install the hood latch Step16: Install the front logo and fairlead
Step 13
Top 4 holes are
1.5”
Bottom 4 holes are
1.75”