Lull 644B Operation Manual - Manual (Page 5)

1
SAFETY
CAUTION, WARNING, & DANGER:
WHAT THEY MEAN
Hazards are identified by the “Safety Alert Symbol” and
followed by a signal word: Caution, Warning, or Danger.
CAUTION
CAUTION means that a situation COULD be
hazardous and MAY result in personal injury if
not avoided.
CAUTION is also used to alert against unsafe
practices.
WARNING
WARNING means that a situation COULD be
hazardous and MAY result in serious injury or
death if not avoided.
DANGER
DANGER means that a situation IS
HAZARDOUS AND WILL result in serious
injury or death if not avoided.
SAFETY STANDARD
The ASME/ANSI B56.6 safety standard for rough
terrain forklift trucks defines safety requirements
relating to the design, operation, and maintenance of
these vehicles. For a copy of this standard write to:
The American Society of Mechanical Engineers
United Engineering Center
345 East 47th Street
New York, NY 10017
DECALS
The decals on the machine provide instructions for safe
and correct operation.
Never make modifications affecting safe operation or
capacity without the expressed written approval of
LULL ® .
When LULL ® approved modifications are made, the
user is responsible for seeing that appropriate decals,
load charts, and instructions are changed.
All plates and decals must be in place and legible at all
times.
ROLL OVER PROTECTIVE
STRUCTURE (ROPS) &
FALLING OBJECT PROTECTIVE
STRUCTURE (FOPS)
This machine is equipped with a Roll-Over Protective
Structure (ROPS) to guard the operator if the machine
tips over. The Falling Object Protective Structure
(FOPS) is built into the ROPS. The FOPS protects the
operator from falling objects.
Despite the protection of the ROPS/FOPS, it cannot
protect the operator from every possible hazard. Do not
consider the ROPS/FOPS a substitute for safe
practices and good common sense.
Any modification to a ROPS/FOPS, such as welding or
drilling holes in the structural members for mounting
brackets, will affect the ROPS/FOPS capability to
provide the required protection.
Any modification or repair without the specific written
approval of
LULL INTERNATIONAL, INC.
will void the ROPS/FOPS certification. Contact your
authorized
LULL INTERNATIONAL, INC.
dealer before making any modifications or repairs.
Failure to do so may void the ROPS/FOPS certification.
W1038
W