Lull 644B Operation Manual - Manual (Page 13)

INSTRUMENTS AND CONTROLS
9
IGNITION SWITCH
Ignition Switch Location
The ignition switch (1) is located on the dash, near the
right side.
Ignition Switch Positions
The ignition switch has four positions:
(1) OFF: The key may be removed or inserted only
at this position. The engine and all electrical
circuits except the horn circuit are shut down at
this position.
(2) ON: All electrical circuits except the engine
starter circuit are operational.
(3) START: Activates the engine starter. When the
key is released the switch will return to the ON
position and remain there.
(4) This position is reserved for future use and
currently has no function.
Note: The starter will not engage unless the shift
selector is placed in the NEUTRAL position.
THROTTLE
Engine Throttle Pedal
Push throttle pedal (1) down to increase engine speed.
BRAKE PEDAL
Service Brake Pedal
Push brake pedal (2) down to slow or stop machine.
1
H1007
H1021
1
4
3
2
H1009
H1009