Apple iMac G3 (Original) - Manual (Page 18)

18
5 Replace the cover, making sure it snaps into place.
If the cover doesn’t fit properly, check the cable connections to make sure the cables are
layered properly.
6 Use a Phillips screwdriver to screw the screw back on the lower back cover.
Do not use a powered screwdriver. It may damage the screws on your computer.
7 If necessary, to secure your computer, place the security cable through the handle and lock it.
For more information, see the online documentation that came with your computer.
8 Reconnect the cables and power cord you disconnected from your computer and turn on the
computer.
If you need help reconnecting your cables, see the setup instructions that came with your
computer.
Replace the plastic cover.
Be sure to snap the
cover back into
place all around
its edges. Reinsert this screw.
Warning Never turn on your computer unless all of its internal and external parts are in
place. Operating the computer when it is open or missing parts can be dangerous and
damage your computer.