Apple iMac G3 (Original) - Manual (Page 10)

10
10 Use a Phillips screwdriver to unscrew the two screws inside the plastic handle.
11 With one hand on the plastic handle, gently pull the handle straight up and out of the
computer.
12 Lay the logic board/drive assembly on a clean surface.
13 If you moved around the room at all, you may have generated some static electricity. Touch
any exposed metal on the logic board/drive assembly. This helps protect the computer from
damage caused by electrostatic discharge.
Now go to the next section, “Installing Memory” on page 11 or “Replacing the Battery” on
page 14.
Remove the two screws located inside the plastic handle.
Use the plastic handle to
remove the logic board/drive
assembly by gently pulling it
straight up and completely
out of the computer.