Apple iMac G3 (Original) - Manual (Page 14)

14
Replacing the Battery
1 Remove the top cover of the battery holder. You may need to use a small screwdriver and
insert it into the notch on the side of the cover to gently pop the cover off.
2 Remove the old battery, noting the orientation of the positive and negative ends of the battery.
3 Insert the new lithium battery, with the positive and negative ends in the correct orientation.
Important Do not touch the screwdriver to any part of the main logic board.
To replace the battery, remove the top cover of the
battery holder. You may need to use a small
screwdriver inserted into the notch on the side
of the cover to gently pop the cover off. Be sure
not to touch the screwdriver to any part of
the main logic board.
Important Batteries contain chemicals, some of which may be harmful to the environment.
Please dispose of used batteries according to your local environmental guidelines.
Important Installing the battery incorrectly may cause an explosion. Use only the same
type of battery or an equivalent battery recommended by the manufacturer. For more
information, contact an Apple-authorized service provider or Apple.