Apple Power Macintosh 7600/120 Series - Manual (Page 15)

Set the switch to show “115” for
voltages in the 100–130V range.
Set the switch to show “230” for
voltages in the 200–270V range.
Check to see that the voltage switch
on the back of your computer is
properly set before you plug it in.
If you need to change the setting,
insert a small screwdriver here
and slide the switch.
WARNING Setting the correct voltage for your computer does not set the
voltage for your monitor even if the monitor’s power cord is connected
directly to your computer. To protect your monitor, be sure to use the
appropriate adapter or voltage converter, if one is necessary.
4 Chapter 1