Apple Logic Pro 9 (TDM Guide) - Manual (Page 19)

To insert the EXS24 TDM
µ
Click the top Insert slot of an aux channel strip in the TDM Mixer, and choose EXS24 TDM
from the pop-up menu.
To play the EXS24 TDM sampler inserted in the aux channel strip
µ
Select the corresponding aux track in the Arrange window.
When the track is selected, you will be able to play and record the sampler instance.
Subsequent insert slots in the aux channel strip allow the insertion of TDM effect plug-ins,
for processing of the sampler’s output signal. Further TDM Mixer processing options such
as sends to effect busses and output routings behave as per usual.
Note: The input routing parameter has no effect, as is the case when using
TDM instruments such as Virus TDM.
Using ESB TDM
ESB TDM allows the outputs of the DTDM Mixer—processed by the computer CPUs (Direct
TDM audio engine)—to be routed in to the input slots of TDM Mixer aux channel strips.
This enables you to process Logic Pro audio tracks and Logic Studio or Audio Units
instruments with TDM-based effects.
Note: Direct TDM must be activated in the Logic Pro > Preferences > Audio > Devices
pane if you want to route signals from the DTDM Mixer into the TDM Mixer. See
Direct TDM Settings .
19 Chapter 3 ESB TDM and EXS24 TDM