Apple PowerBook G4 (17-inch, Double Layer Super Drive) - Manual (Page 6)

6 Chapter 1 Getting Started
Setting Up Your PowerBook
Your PowerBook is designed so that you can set it up quickly and start using it right
away. The following pages take you through the setup process, including these tasks:
 Plugging in the power adapter
 Connecting the cables
 Turning on your PowerBook
 Configuring a user account and other settings using Setup Assistant
Step 1: Plug In the Power Adapter
If there is protective film around the power adapter, remove it before setting up your
PowerBook.
m Insert the AC plug of your power adapter into an outlet and the power adapter plug
into the PowerBook power adapter port.
Important: Make sure the AC plug is fully inserted into the power adapter and the
electrical prongs on your AC plug are in their completely extended position before you
plug the adapter in to the outlet.
To extend the reach of your power adapter, you can attach the AC cord. First, pull up on
the AC plug to remove it from the adapter, and then attach the included AC cord to the
adapter. Insert the other end into a wall outlet. For an illustration, see page 21.
AC plug
®
AC cord
Power adapter plug
¯
Power adapter port AC plug
LL3264.book Page 6 Wednesday, August 17, 2005 6:33 PM