Brother V61 - Manual (Page 71)

69
3
———————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
*Rfc.: Reinforcement **Select a stitch width of 5.0 mm (3/16 inch) or less.
Fagoting
Stitching across an open seam is called “fagoting”. It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or
a sheet of water-soluble stabilizer.
• If you draw a line down the middle of the
thin paper or water-soluble stabilizer,
sewing is easier.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “Selecting stitching”
(page 37).
f
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
g
After sewing is finished, remove the paper.
Stitch Name
Pa
tt
er
n
Pres
ser
Fo
ot
Pattern No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needl
e
W
al
kin
g F
oot
Re
vers
e/
Rei
nfo
rcem
ent
St
it
chi
ng
70 s
ti
tc
hes
mo
d
el
60 s
ti
tc
hes
mo
d
el
50 s
ti
tc
hes
mo
d
el
40 s
ti
tc
hes
mo
d
el
Auto Manual Auto Manual
Decorative
stitch
N 25 25 25 –
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
3.5
(1/8)
1.5-4.0
(1/16-3/16)
No No
*
Rfc.
N 26 26 26 24
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
4.0
(3/16)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
N 27 27 27 –
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
2.5
(3/32)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
N 28 28 28 –
Decorative hemming on
thin, medium weight and
plain weave fabrics, heir-
loom stitching, etc.
5.0
(3/16)
1.5-7.0
(1/16-1/4)
2.0
(1/16)
1.5-4.0
(1/16-3/16)
**
Yes
( J )
No
*
Rfc.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
CAUTION
1
2
3