BT 400 Plus User Manual

Page 20

Paragon 400 Plus ~ 3rd Edition ~ 5th August ’03 ~ 5290

To use Call screening (answering
machine volume)

You can let your Paragon 400 Plus
answer a call and have the loudspeaker
switched on so you can hear the caller.
This gives you the option of picking up
the handset and speaking to them or
letting them leave a message.

While the answering machine is
switched on or in an idle state.

Adjust the loudspeaker volume. The
level is shown at the bottom of the
display.

If you have the Caller return switched
on, you will also hear the caller’s phone
number (if available) and the time and
date of the call at the end of their
message.

Vol

ANS

WER

CHINE

To adjust the playback volume

During playback:

Adjust the loudspeaker volume. The
level is shown at the bottom of
the display.

Vol

To use Caller return (Auto 1471)

Caller return automatically dials 1471 after a
caller has left a message on your answering
machine and records the announcement giving
the telephone number (if available) and the time
and date of the call. So even if a caller chooses
not to leave a message, you may still have their
telephone number recorded if the caller did not
withhold their number.

To switch on Caller return

Press until the display shows 1471.

Switches between ON and OFF.

To confirm the setting displayed.

While the Caller return setting is
switched ON, the display shows 1471.

Dial /OK

Note

Please note that the answering machine only

records the announcement from the 1471

network. The announcement always states that

the caller phoned “today” and then gives the

time of the call. It is, therefore, not possible to

know the actual date that someone called.

This is important to remember if you have not

accessed your messages for a few days. Please

also note that Option 3 cannot be accessed

automatically, you will need to actually dial

1471 for this option.