PureFlow AirDog DF-165 - 7.3L Ford 1999-2003 - Manual (Page 9)

9
PureFlow AirDog
AirDog
®
II Ford PowerStroke 1999 - 2003 7.3L
Section 4 AirDog ® & Mounting Brackets
Installing the AirDog
®
& Mounting Brackets on the
Truck’s Frame.
Figure 2 Figure 3 Figure 4
4-1. Assemble the AirDog® mounting bracket to the frame bracket. Use the aluminum
spacer block to adjust the AirDog® to clear lines and wiring harnesses on the frame.
Also adjust the assembly up or down on the frame bracket as needed for clearance.
Mounted Outside the Frame
Figure 5 Figure 6 Figure 7
FUEL IN ENGINE
4-3. Install 1/2” male J2004 quick connect x
3/8” NPTF (08J2044-3/8NPTF) into the
“ENGINE”
and “FUEL IN” ports in the AirDogII®.
Figure 8
4-4. Install the 3/8” male J2004 quick connect x 1/8” NPTF (06J2044) into the tank port of
the AirDogII. The tank port is the smaller port next to the “ENGINE” port.
Figure 8a
WARNING: The NPT fitting threads must be lubricated with oil or anti-seize compound
before installation to prevent galling!