Installing the airdog, Mounting brackets on the truck’s frame, cont’d, For this installation, the airdog – PureFlow AirDog DF-100 W/O In-Tank Fuel Pump - Dodge Cummins 1998.5-2004 User Manual

Page 10: Ii is mounted inside the frame

PureFlow AirDog

AirDog

II Dodge 1998 ½ - 2004

Section 4 AirDog

& Mounting Brackets

Installing the AirDog

& Mounting Brackets on the Truck’s

Frame, cont’d!

NOTE: The AirDog

can be mounted on either the inside or the outside of the frame, as

space or personal choice dictates.

Mount

The AirDog

Outside

The

Frame

Figure 9

Figure 10

Inside

The

Frame

Figure 11

Figure 12

For this installation, the AirDog

II is mounted inside the frame!

4-5.

Clamp the frame between the AirDog

II bracket assembly and the backing plate

using the bolts, lock washers, and nuts included in the kit.

Figure 13

4-6.

Position the AirDog

II on the frame as necessary for clearance.

NOTE: Be sure to mount the AirDog

II so the ‘FUEL IN’ port is directed toward the rear of

the vehicle.

Figure 13A

Figure 13B

NOTE: Some pickup model frame rails have a bracket that is used to support the frame
during the manufacturing process If this bracket is on your frame rail and obstructs the
proper positioning of the AirDog

II mounting bracket, you may remove part or all of it, as

needed. Be very careful not to damage the frame flange!