PureFlow AirDog DF-165 - Dodge Cummins 1989-1993 - Manual (Page 9)

9
PureFlow AirDog
AirDog
®
II Dodge Cummins 1989-1993
Section 4 AirDog ® II & Mounting Brackets
Installing the AirDog
®
II & Mounting Brackets on the
Truck’s Frame!
Figure 2 Figure 3
4-1. Assemble the AirDog II mounting bracket to the frame bracket.
Figure 4 Figure 5
4-2. Use the spacer block to clear lines and wiring harnesses on the frame. Adjust the
assembly up or down on the frame bracket as necessary for clearance.
Out to ENGINE FUEL IN
4-3.
Install a 1/2” male J2004 quick connect x 3/8”
NPTF (08J2044-3/8NPTF) into the “ENGINE”
and “FUEL IN” ports in the AirDog II.
Figure 6
4-4. Install the 3/8” male J2004 quick connect x 1/8” NPTF (06J20441/8NPTF) into the
“TANK” port of the AirDogII. This is the smaller port next to the port marked
“ENGINE”.
WARNING: The NPT fitting threads must be lubricated with oil or anti-seize compound
before installation to prevent galling!
Figure 7
4-5. Attach the AirDog II
®
to the completed bracket assembly as
shown in figures 4 and 5 .
Figure 8