PureFlow AirDog DF-165 - Dodge Cummins 1989-1993 - Manual (Page 21)

21
PureFlow AirDog
AirDog
®
II Dodge Cummins 1998 - 1993
Section 6 Electrical Harness
Connecting the power supply leads, cont’d!
6-4B. Should you choose to connect the power supply leads directly to the battery,
connect the RED (+) lead to the POSITIVE (+) post of the driver's side battery.
Connect the BLACK (-) lead to the NEGATIVE (-) post of the same battery.
Black (-) Red (+)
Figure 50
6-5.
Route the wiring harness to the AirDog
®
II and connect the 2 pin Deutsch connector to
the corresponding connector on the AirDog
®
II.
Figure 51
NOTE: If the Optional Indicator Light is not used, secure the pressure switch lead to the
wiring harness with a plastic tie. Also, cover the pressure sensor lead to protect it you may
want to use it later.