SkyTrak 6036 Parts Manual - Manual (Page 35)

BOOM
31200731 6036/6042 2-15
Figure 2-4 Third Boom Section
Item Part Number Qty. Description Rev.
9 7079572 5 MOLDED WEAR PAD
14 7082311 18 WEAR PAD INSERT
16 7082362 4 WEAR PAD SHIM, 0.134
19 7085442 2 WEAR PAD SPACER, 0.88
21 7096491 6 WEAR PAD SCREW SPACER
22 7111572 2 HIGH CAPACITY WEAR PAD
26 7117094 1 THIRD BOOM SECTION
50 8303679 6 HEX HD CAPSCREW, 3/8-16X1.75, GR5
51 8303681 8 HEX HD CAPSCREW, 3/8-16X3/4, GR5
55 8303738 2 HEX HD CAPSCREW, 3/8-16X0.875, GR5
63 8307005 16 LOCKWASHER, 0.375
68 8307204 14 WASHER, 3/8
N1 Note Ref SHIM PADS WITH SPACERS TO MAINTAIN A TOTAL MINIMUM GAP OF
0.07 TO 0.13 INCHES ON BOTH HORIZONTAL & VERTICAL DIRECTIONS.
N2 Note Ref APPLY THREAD LOCKING COMPOUND (8526007) TO ALL SLIDE PAD
SCREWS & TORQUE TO 28-34 LB-FT, (37.9-46.0 Nm).
N3 Note Ref ALL SLIDE PATHWAYS TO BE FREE OF PROJECTIONS. CHECK
PATHWAYS ON UNDERSIDES OF INNER & INTERMEDIATE BOOMS BY
SCRAPING WITH SQUARE EDGE OF WEAR PAD SHIM. SCRAPER MUST
NOT SNAG.
N4 Note Ref COAT ALL UNPLATED SHOULDER BOLTS WITH ANTI-SEIZE LUBE
(8522012) & PROTECT HEADS & THREAD ENDS OF EXTERIOR BOLTS
WITH VARNISH (8526406).