BNC 845-M User Manual

Page 50

Text mode
Original mode

Model 845-M Programmer’s Manual V1.1 2011

:LAN:KEEP:TIMeout (not implemented)

:SYSTem:COMMunicate:LAN:KEEP:TIMeout

:SYSTem:COMMunicate:LAN:KEEP:TIMeout?

This command sets the length of time for the TCP Keep Alive setting.
Range 0 sec to 3600 sec

:LAN:RESTart

:SYSTem:COMMunicate:LAN:RESTart

This command restarts the network to enable changes that have been made to the LAN setup.

:LAN:SUBNet

:SYSTem:COMMunicate:LAN:SUBNet

:SYSTem:COMMunicate:LAN:SUBNet?

This command sets the signal generator’s local area network (LAN) subnet mask address for your
internet protocol (IP) network connection.

:SOCKet:ECHO

:SYSTem:COMMunicate:SOCKet:ECHO

This command turns the echo from the Model 845-M controller on or off. Echo is typically turned on
only for a telnet session. The Model 845-M returns a “>>” prompt when ready.