Fast & Fluid HA650 - Manual (Page 15)

Operator manual HA450 / HA650 V. 1.0
15
3.2 Operation
3.2.1 General dispensing procedure
For all the software instructions: see the software documentation.
1. Place the can. See § 3.2.2.
2. Move the can table up. See § 3.2.3.
3. Choose the recipe and dispense. See the software
documentation.
4. Move the can table down. See § 3.2.4.
5. Remove the can.
3.2.2 Place the can
1. Place the can (A) at the centre of the mark (B) on the can
table.
WARNING
Only push the emergency stop switch in the case of a safety emergency.
Make sure that the problem is solved before you reset the emergency stop switch.
When you reset the emergency stop switch, the machine restarts automatically. When the machine
is operational, you hear ’beep beep’.
CAUTION
Do not remove the power from the machine. The machine must stir the colorants periodically.
Note
The computer switch only turns the computer on and off.
A B
A
B