Fast & Fluid AT550 - Manual (Page 8)

p8
© Fast & Fluid Management, AT550
Installation
A - Installing the dispenser
Step 1 - Unpack the machine
> >
Place the crate near the place
of installation.
Remove the cardboard box
and remove the plastic foil
around the machine.
Remove the two bottom
panels to access the screws
that are connected to the
crate.
Be careful not to damage the body and surfaces of your AT550 with any
tools while unpacking it.
> >
Remove the bolt's on both
sides.
Carefully lift the machine
from the skid with a fork lifter
and roll the machine to its
final operational position. Lower the 3 adjustable feet
far enough to lift the machine
off its wheels. Lock it with the
locknut.