Fast & Fluid AT550 - Manual (Page 7)

p7
© Fast & Fluid Management, AT550
Safety Instructions
General safety instructions
Attention! Before installing the equipment and setting it in operation,
please read the instructions for use carefully. This is safer for yourself and
prevents unnecessary damage to the machine.
The manufacturer accepts no liability if the instructions below are not followed:
1. If a machine has been damaged (during transport, for example), do not attem pt to set it in operation. When
in doubt, first contact either your supplier or the F&FM service departm ent.
2. The equipment should be positioned and connected up in strict accordance with the installation instruc tions.
3. All local safety regulations and ordinanc es should be observed.
4. The machine may be connected only to a 230V/16A/50Hz or 100- 110V/25A/50-60HZ earthed wall socket
installed in accordance with the regulations.
5. Users should see to it that the machine is kept in good condition. Defective c omponents should be replac ed.
6. In order to prevent physical injury, the doors should be c losed and the paneling fitted during norm al use.
7. All service activities (other than routine m aintenance and adjustments) may only be c arried out by qualified
technicians. See to it that the m ains lead is always kept unplugged while repairs are being c arried out.
8. Because of the design of the valve, a nozzle drill m ay never be used. Cleaning is done by running the
c leaning program.
Specific warnings in this manual
Attention! MOVING PARTS CAN CAUSE INJURY. Always turn off power
before accessing moving parts.