AKiTiO Taurus Super-S3 LCM - Manual (Page 6)

Taurus Super-S3 LCM System Setup
Page 4
2 System Setup
2.1 Hard Drive Assembly
Your unit may come with pre-installed hard drives. Before opening such an enclosure, please read
the warranty from your vendor carefully, as this could void your warranty.
1. Remove the four screws on the bottom of the case, push the inner chassis out and remove
the outer enclosure. The aluminum stand does not have to be removed for the assembly.
2. Install the first hard drive and mount it with two screws on each side.
3. Install the second hard drive and mount it with two screws on each side.