AKiTiO Taurus Super-S3 LCM - Manual (Page 17)

Taurus Super-S3 LCM Appendix
Page 15
4 Appendix
4.1 Precautions
4.1.1 Power on/off precautions
It is highly recommended to switch the unit off when not in use. When re-locating the device or
when not in use for an extended period of time, we strongly recommend unplugging the unit.
4.1.2 Location and placing precautions
Avoid positioning your device in the following places:
•
Locations with direct sunlight, next to radiators, other sources of heat.
• Locations with very high temperatures (more than 38°C) or humidity (more than 90%).
• Very dusty or sandy locations.
• Locations subject to vibration, shock, or with a sloping base.
4.1.3 Electricity and power plug
Careful attention must be paid to the following points in order to prevent damage, fire, and/or injury:
•
When removing the power cable from the socket, pull on the plug fixture and never on the cord.
• Do not connect and remove the power cable with wet hands.
• Keep the power cable away from heaters.
• Never try to repair the power cable yourself or to modify it in any way.
• If the unit is dropped or becomes damaged in any other way, unplug the power cable.
• Always connect the power adapter to your device before you plug it into the wall socket.
4.1.4 Cables
Use only the cables supplied or recommended by your vendor in order to avoid the risk of
malfunction, electric shock, and/or possible interference to the device.
4.2 FAQ
Q: What file system should I choose to format my drive?
A: This depends on how you want to use the drive but in general, we recommend following:
• Windows  NTFS
• Mac OS X  HFS+ (Mac OS Extended)
• To use it on both PC and Mac  FAT32 (single file size is limited to 4GB)
Q: How many drives can fail before I lose my data?
A: For RAID 0, any drive failure will result in the data being lost. For RAID 1, more than one drive
failure at the same time will mean the data cannot be recovered anymore.
Q: Can I install only one hard drive or set up the two drives as two independent volumes?
A: No, the Taurus Super-S3 LCM requires two hard drives and they are combined in a RAID array.
© Copyright 2014 by AKiTiO. All Rights Reserved
The information contained in this manual is believed to be accurate and reliable. AKiTiO assumes no responsibility for
any errors contained in this manual. AKiTiO reserves the right to make changes in the specifications and/or design of this
product without prior notice. The diagrams contained in this manual may also not fully represent the product that you are
using and are there for illustration purposes only. AKiTiO assumes no responsibility for any differences between the
product mentioned in this manual and the product you may have.