5 detailed view, 1 front view, 2 rear view – AKiTiO Taurus Mini Super-S3 LCM User Manual
Page 4: Detailed view
Taurus Mini Super-S3 Introduction
[2]
1.5 Detailed View
1.5.1 Front View
LED/Button
Status
•
Green = Data access (read/write)
•
Red = Error or empty drive bay
•
OFF = HDD status normal
•
Orange = Rebuilding data
Select
•
Select setup menu or mode
OK
•
Confirm current setting or enter setup menu
Important
Before turning on the power, make sure the interface cable is connected and the computer is
running, otherwise the alarm goes off and the message
[HDD Error or No Interface] is shown.
It is normal for this message to appear for a few seconds when the power is turned on.
Note
HDD A indicates the drive at the bottom and HDD B indicates the drive on top.
1.5.2 Rear View
Icon/Label
Meaning
DC IN +12V
Power receptacle
USB 3.0
USB 3.0 SuperSpeed port
FW800
FireWire 800 port
eSATA
External SATA port