AKiTiO Taurus Mini Super-S3 LCM - Manual (Page 14)

Taurus Mini Super-S3 LCD Display
[12]
3.4.4 Backlight Setup
The backlight for the LCD display can be enabled, disabled or set so that it turns off automatically,
when the screen has been idle for a certain amount of time.
• [ON] Always ON.
• [OFF] Always OFF.
• [1min] Backlight turns off when the screen has been idle for more than one minute.
• [3min] Backlight turns off when the screen has been idle for more than three minutes.
• [5min] Backlight turns off when the screen has been idle for more than five minutes.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
different options.
• To exit the menu without changing any of the settings, press the [Select] button until you see
the Exit screen and then press the [OK] button.
• To change the setting, press the [Select] button to choose your preferred mode and then press
the [OK] button to confirm the change.