beautypg.com

Important safety rules, Service – Steele Products SP-PB208 User Manual

Page 3

background image

Wash hands after handling the power cord. Touching the power cord could expose you to lead,
which is known in the State of California to cause cancer,birth defects and other reproductive harm.

All work areas should be clean and well lit. Accidents are more likely to occur in poorly lit and
cluttered areas.

Keep children, and other distractions at a distance while operating power tools.

Keep the power cord in good condition, and replace damaged cords immediately. Do not use the
cord to pull the plug from the outlet. Keep the cord away from materials and surfaces that could
damage cords. The risk of electric shock increases when the power cord is damaged.

Always use the appropriate extension cord, making sure it is rated for use with drills. Always be
sure the extension cords are in good condition, free of cuts or nicks in the insulation. If using the
drill in an outside area with an extension cord, make sure the cord is rated for outdoor use.

Do not make contact with a grounded surface while using this power tool.Contact with surfaces like
pipes, radiators or major appliances increases your risk of electric shock.

Use common sense while operating this drill.
Do not use this drill if you are:
Feeling tired or are under the influence of alcohol or drugs.
Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this drill always:
Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
Be sure all adjusting keys or wrenches have been removed before starting the drill.
Be sure the power switch is in the “OFF” position before plugging the drill into an electrical outlet.

Safety glasses and ear protection must be worn during operation.

IMPORTANT SAFETY RULES

5

ALWAYS WEAR EYE PROTECTION.
A drill press can throw foreign objects into your eyes which could cause
permanent eye damage.

ALWAYS wear safety goggles (not glasses). Ordinary eyeglasses
have only impact-resistant lenses...they ARE NOT safety goggles.

FOLLOW THESE STEPS TO MAINTAIN SAFE WORKING CONDITIONS AND GOOD WORKING
CONDITION OF POWER TOOLS.
IMPROPER CARE CAN RESULT IN ELECTRIC SHOCK OR SERIOUS
INJURY.

Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
Use the correct tool for the job. Using the correct tool is safer and faster.
Make sure the power switch is in good working order. If the power switch no longer turns the tool
“ON”or “OFF”, discontinue use, and have the tool replaced or repaired.
Remove the power cord from the power source before storage, changing accessories,or moving the
tool.
Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life
of the power tool, and reduce the risk of injury.
Check to be sure all moving parts are free from binding and are properly aligned.
Use only accessories that are recommended by the manufacturer for your tool model.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or maintenance by
unqualified personnel could result in a risk of injury.

When servicing a tool, use only identical replacement parts and follow instructions in the manual.
Use of unauthorized parts or failure to follow maintenance Instructions may create a risk of shock or
injury.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage
of this product. Before use, read carefully and understand all warnings, cautions, instructions and
labels. Failure to do so could result in serious personal injury, property damage or even death.

6