3 installing the air locker – ARB RD110 User Manual

Page 24

3 Installing the Air Locker

NOTE : Any contact due to vibration or shock could wear the

tube over time and eventually cause a leak. Keep the
tube away from any sharp edges of the bearing cap or
any other part of the differential housing.

c Check the gap between the Air Locker and any close points on the

seal housing tube with a feeler gauge to insure that adequate
clearance exists.

NOTE : Less than 8mm [5/16”] should be considered too little

clearance.

c Position the access cover in its installed position to check that no

part of the tube comes in contact with it.