4 installing the air locker, Installing the carrier bearing – ARB RD82 User Manual

Page 16

Text mode
Original mode

4 Installing the Air Locker

4.2

Installing the Carrier Bearing

Apply a thin film of high pressure grease to the bearing journal of

the Air Locker.

Using a bearing press or arbor press, press one of the bearing

cones which was removed from the original differential onto the
bearing journal (refer to Figure 7.) until the bearing seats firmly
against the bearing journal shoulder.

Figure 7.

NOTE :

Never re-use any bearings which are damaged or
worn.
Do not bend or damage the seal housing tube.