IDEX Health & Science REGLO Digital – version without Settings Menu User Manual
Page 32
32
05 REGLO Digital/ISMATEC SA/14.12.02/CB/
Serielle Schnittstelle / Serial interface / Interface sérielle
Befehl
Funktion / Beschreibung
Beispiel
Antwort
Command
Function / Description
Example
Response
Commande Fonction / Description
Exemple
Réponse
!
Abfrage:
Kalibrierte Fließrate ml/min (bei max. Drehzahl = 160/100 min
–1
)*
1!13
58.3 ml/min1310
Inquiry:
Calibrated flow rate in ml/min (at max. speed = 160/100 rpm)*
oder / or / ou**
Interrogation:
Débit calibré ml/min (à vitesse max. = 160/100 t/min.)*
600RSV/min1310
!_ _ _ _
Eingabe:
Kalibrierte Fließrate ml/min (bei max. Drehzahl = 160/100 min
–1
)*
1!058313
*
(Die Kommaposition hängt vom programmierten Pumpenkopf und Schlauch ab)
Input:
Calibrated flow rate in ml/min (at max. speed = 160/100 rpm)* (The position of the
decimal point depends on the programmed pump-head and tubing)
Saisie:
Débit calibré ml/min (à vitesse max. = 160/100 t/min.)* (La position du point décimal
dépend de la tête de pompe et du tube programmés)
[
Abfrage:
Anzahl Stellen nach dem Komma (bei max. Fließrate)
1[13
21310
Inquiry:
Number of digits after the decimal point (at max.flow rate)
Interrogation:
Nombre de décimales après le point décimal (au débit maximal)
+
Abfrage:
Pumpenschlauch Innendurchmesser (Antwort 0.00 mm = rpm-Modus)
1+13
1.6 mm1310
Inquiry:
Pump tubing inner diameter (response 0.00 mm = mode rpm)
Interrogation:
Diamètre intérieur du tube de pompe (réponse 0.00 mm = fonction par tours/min)
+_ _ _ _
Eingabe:
Pumpenschlauch Innendurchmesser (in
1
/
100
mm)
1+010213
*
Input:
Pump tubing inner diameter (in
1
/
100
mm)
Saisie:
Diamètre intérieur du tube de pompe (en
1
/
100
mm)
V
Abfrage:
Dosierzeit
1
/
10
Sek.
1V13
451310
Inquiry:
Dispensing time
1
/
10
sec.
Interrogation:
Temps de dosage
1
/
10
sec.
V_ _ _ _
Eingabe:
Dosierzeit in
1
/
10
Sek. (0000–9999)
1V600013
*
Input:
Dispensing time in
1
/
10
sec. (0000–9999)
Saisie:
Temps de dosage en
1
/
10
sec. (0000–9999)
VM_ _ _
Eingabe:
Dosierzeit in Minuten (000–999)
1VM03013
*
Input:
Dispensing time in minutes (000–999)
Saisie:
Temps de dosage en minutes (000–999)
VH_ _ _
Eingabe:
Dosierzeit in Stunden (000–999)
1VH02413
*
Input:
Dispensing time in hours (000–999)
Saisie:
Temps de dosage en heures (000–999)
U
Abfrage:
Rollenschritte für »MODE DISP • Volume«
1U13
1001310
Inquiry:
Roller steps for »MODE DISP • Volume«
Interrogation:
Pas des galets »MODE DISP • Volume«
U_ _ _ _
Eingabe:
Rollenschritte (0001–65535) für »MODE DISP • Volume«
1U020013
*
(Volumen pro Umdrehung = max. Fließrate / 160/100)*
Input:
Roller steps (0001–65535) for »MODE DISP • Volume«
(Volume per revolution = max. flow rate / 160/100)*
Saisie:
Pas des galets (0001–65535) pour »MODE DISP • Volume«
(Volume par tour = débit maximal / 160/100)*
* 2, bzw. 4-Kanal-Version
* 2 and 4 channel version
* 2, resp. 4 canaux version
** Rollenschritt-Volumen pro Minute, falls die REGLO Digital im rpm-Modus ist (siehe Seite 14 - Schlaucheingabe)
** Roller step volume per minute if pump operates by speed (rpm) see page 14 'Setting the tube size'.
** Volume d'un pas de galet lorsque la pompe fonctionne par tours/min (rpm) (voir p. 14, 'Programmation du Øint. des tubes'