Fluid Management Dual-Pump Harbil - Manual (Page 6)

4 21
GENERAL INSTRUCTIONS
DUAL PUMP 192 OZ.
COVER, MOTORIZED ASSEMBLY
3. PRIMING THE PUMPS
To prime the pumps, move the knob (see parts list for orientation) on the top of
the gauge assembly all the way up until the gauge is stopped by the indicator at
the full measure. Hold it up for several seconds and then depress the knob all
the way down until it stops at the zero position. Repeat this two or three more
times, using an even amount of force. Both the one ounce and the five ounce
pumps require priming.
The pumps are now ready to dispense colorants.
CAUTION:
Do not open the dispensing valve lever (see parts list for orientation) during the
priming of the pumps.
® ------
ITEM PART NO. DESCRIPTION NO.REO.
4439000 Cover, Motorized Assembly,192 oz. 1
4439010 Cover, Motorized Assembly.3434. 192 oz. 1
1 4430008 Motor, 1267. w/Aluminum Cover & 28" Cord Only 1
1 4430009 Motor 3434. w/Aluminum Cover & 28'" Cord Only 1
1 4430001 Motor Only, 1267.120V.60 Hz. 1
1 4430101 Motor Only, 3434,220V.50 Hz. 1
1 4430102 Motor Only, 4022. 24V.50 Hz. 1
2 4430003 Cover, Motor, Aluminum Only 1
3 4438002 Cord, Motor Set. 28'" U.S. 1
4 4000023 Strain Relief.#6N3-4 Heyco 1
5 4439001 Cover, Canister.Motor.Only.192 oz. 1
6 4418007 Pin, Dowell,1/8 x 3/8'" Steel 2
7 4000028 Screw, Set.10-32 x 1/4'".Slot.SS 1
8 4430002 Connector.Agitator, 5/16'". w/Screw 1
9 4000064 Screw,THCS.8-32 x 3/8'".Slot.SS 3