Fluid Management Dual-Pump Harbil - Manual (Page 4)

23
2
NEW STYLE
GENERAL INSTRUCTIONS
DUAL PUMP TURNTABLE FLOOR BASE ASSEMBLY
1. ASSEMBLING THE MACHINE
fastening of · the individual canisters to the in-line base or turntable in their
proper numerical or alphabetical sequence. Do not fill the canisters
with colorant before they are mounted on the base.
A. Place the first canister in position on the in-line base or at the front of the
turntable.
B. Screw three ¼-20 hex-head bolts with rubber washers into the bottom of the
canister and after all three bolts are in place snug them up with a wrench
(these bolts and washers are packaged in a separate bag with the red nozzle
caps). DO NOT over tighten the bolts.
C. On turntable models, depress the index lever and move the turntable to
the next position and repeat the above procedure until all of the canisters
are mounted.
D. The canister covers can now be installed on the canisters.
IMPORTANT:
See Section 6, CANISTER COVERS AND NOZZLE CAPS on page 8.
CAUTION:
To avoid risk of fire or injury, unplug power before servicing fuses or
electrical components.
To reduce the risk of electric shock, use indoors only.
ITEM PART NO. DESCRIPTION
NO.REQ.
1 4100534 Turntable.12 Canister.34" DP
1
1 4100538 Turntable.14 Canister.38" DP
1
2 4131284 Box, Receptacle, Assembly, Complete,12,NS 1
2 4131484 Box, Receptacle, Assembly, Complete,14.NS 1
2 4131684 Box, Receptacle, Assembly, Complete. 16,NS 1
2 4103801 Box, Receptacle
12-14-16
4 4000157 Plug, Button.3/4" #3754.Nickel
1
5 4105402 Shaft, Center, Turntable, DP 1
6 4000005 Bearing, Ball, #6003Z (TT & W heel)
1
7 4100400 Bearing, Housing Assembly 1
7 4100401 Bearing, Housing Only
1
8 4103806 Adapter, Collector Ring
1
9 4103815 Ring, Collector Assembly, NS 1
10 4103816 Brush, Collector, Complete w/Bracket (Set) 1
10 4103817 Brush, Collector, Complete w/Bracket (1) 2
10 4100828 Brush, Brush Holder Only 2
11 4100808 Brush, Collector Only 2
12 4100813 Bracket, Brush Holder 2
12 4000138 Ring, Retaining #5105-50-015 2
12 4000139 Ring, Retaining #1000-25-STPH 4
13 4000033 Switch, Toggle On / Off Assembly 1
14 4100817 Stud, Bracket Mount (Upper) 1
14 4100818 Stud, .Bracket Mount (Lower) 1
15 4000011 Pin,Cotter.3/32 X 3/4" LG.C/Z 5
16 4120925 Pin, Index Assembly Complete (Floor) 1
16 4120905 Pin, Index Only (Floor) 1
17 4120908 Nut.Hex.7/16-27, Thin, C/Z 1
18 4120906 Spring. Index (Floor) 1
19 4150300 Wheel. Axle Assembly (Floor) Complete, DP 1
19 4150301 Axle, Wheel Only (Floor), DP 1
19 4000005 Bearing.Ball.#6003Z.WH & TT 5
19 4000006 Ring, Retaining.#3100-66 5
20 4000008 Knob, Black, #25, 5/16-24 TH 1
21 4000010 Washer.Plain.5/16"ID x 5/8" OD 1/16" Thick 2
22 4120909 Link, Index Wire (Floor) 1
23 4120901 Lever, Index.15" (Floor) 1
23 4120902 Lever, Index.18" (Floor) 1
23 4120903 Lever, Index.19" (Floor) 1
23 4120904 Lever, Index.13" (Floor)
1
24 4150819 Ground, W asher Ring, 5oz. 1
25 4150801 Ground, Spring Clip, TT Disp. 2
CAUTION: DO NOT ATTEMPT TO CLEAN DISPENSER WITH FLAMMABLE SOLVENTS OR
OTHER HAZARDOUS MATERIALS.
TERMS: Unless prior arrangements have been made, parts will be shipped UPS-COD. All prices are F.O.B.
Wheeling, Illinois and are subject to change without notice. In all correspondence or phone orders
for parts, please state model number and serial number of the Harbil Dispenser.
NOTE: No parts are to be returned without prior authorization (Returned Goods Authorization number required).