Fluid Management X-Smart - Manual (Page 17)

Operator manual X-Smart V. 0.0
17
1. Remove the brush unit (A) from the bracket (B).
2. Remove the brush (B) from the brush container (A).
3. Rinse and clean the brush.
4. Remove the fluids from the brush container.
5. Place the brush back in the brush container.
6. Fill the brush container with fluid. This fluid must be a water-
based cleaning agent.
A
B
B
A
Note
For disposal of the fluids, follow the local
regulations.
A
CAUTION
Do not exceed the maximum filling height (A).