Fluid Management X-Smart - Manual (Page 16)

16
Operator manual X-Smart V. 0.0
3.3 Maintenance
/i
3.3.1 General cleaning
1. Clean the machine with a cloth and remove all spilled colorant
or other fluids.
2. When the brush is too dirty and does not clean the nozzle of
the canister, rinse and clean the brush. See § 3.3.2.
3. When the nozzles are too dirty, clean the nozzles individually
with a damp cloth. See § 3.3.3.
3.3.2 Cleaning the brush unit
Maintenance activity Period See
Cleaning the machine After every dispensing operation § 3.3.1
Removing the spilled fluids After every dispensing operation § 3.3.1
Cleaning the brush unit Daily or when the brush is too dirty § 3.3.2
Cleaning a nozzle When the nozzle is too dirty § 3.3.3
Refilling a canister When the canister is empty § 3.3.4
CAUTION
Do not use cleaning agents based on organic
solvents to clean painted or plastic parts of the
machine.
CAUTION
Spilled colorant and other fluids must be
removed as soon as possible.
CAUTION
Do not drain spilled colorant or other fluids in
the sink. Observe the local regulations.
CAUTION
If you do not clean these items daily, severe pollution will occur.
Note
The brush unit consists of a brush container and a removable brush that rotates. The brush unit
is installed in a bracket with a click connection.
The brush removes the excess colorant from the nozzles.