Fluid Management X-Smart - Manual (Page 14)

14
Operator manual X-Smart V. 0.0
3.2 Operation
3.2.1 General dispensing procedure
For all the software instructions: see the software documentation.
1. Place the can table in the correct slots for the correct height.
See § 3.2.2.
2. Place the can. See § 3.2.3.
3. Choose the recipe and dispense. See the software
documentation.
4. Remove the can.
3.2.2 Placing the can table
1. Place the can table (A) in the correct slots for the correct
height.
CAUTION
Do not remove the power from the machine. See § 4.1. The machine must stir the colorants
periodically.
WARNING
Do not place any object on top of the machine.
- The turntable moves and objects placed on the machine will fall off. This could lead to damage
of the machine or personal injury.
- The machine cannot bear objects that are too heavy. This could lead to damage of the machine.
A
Note
The correct heigth of the can table depends
on the heigth of the can.
CAUTION
Make sure that the can table is secure.