beautypg.com

Clock/timer – Philips MCM240-37B User Manual

Page 18

background image

18

English

Clock/Timer

Setting the clock

1

In standby mode or system on, press and hold
DISPLAY/CLOCK on the remote control for
more than 3 seconds.

SET CLOCK scrolls on the display.

The clock digits for the hours flash.

2

Press

VOLUME (

3 / 4) (+/-) to set the hours.

3

Press

DISPLAY/CLOCK again.

The clock digits for the minutes flash.

4

Press

VOLUME (

3 / 4) (+/-) to set the

minutes.

5

Press

DISPLAY/CLOCK to confirm the time.

Note:
– The backlight for clock display is dim in standby.

Viewing the clock

Press

DISPLAY/CLOCK.

The clock time is displayed.

Note:
– There is no time display during disc playback.

Setting the timer

The system can be used as an alarm clock,
whereby the CD, TUNER is switched on at a set
time. The clock time needs to be set first before
the timer can be used.

During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.

1

In standby mode or system on, press and hold
TIMER on the remote control for more than 3
seconds.

Display sequence scrolls

SET TIMER and

SELECT SOURCE.

Display sequence shows

CD, TUNER and

flashes.

2

Press

VOLUME (

3 / 4) (+/-) to select the

sound source.

3

Press

TIMER to confirm your desired mode.

The clock digits for the hours flash.

4

Press

VOLUME (

3 / 4) (+/-) to set the hours.

5

Press

TIMER again.

The clock digits for the minutes flash.

6

Press

VOLUME (

3 / 4) (+/-) to set the

minutes.

7

Press

TIMER to confirm the time.

Display sequence shows

VOL12.

8

Press

VOLUME (

3 / 4) (+/-) to set the timer

volume level.

9

Press

TIMER to confirm.

The timer is now set and activated.

Activating and deactivating
TIMER

Press

TIMER on the remote to turn off the

timer or turn on to the last setting again.

If activated, the timer information will display

for a few seconds, then the system resumes to
the last active source or stays in standby mode.

If deactivated, “

OFF” appears.

Note:
– The system will exit timer setting mode if no
button is pressed within 30 seconds.

pg001-021_MCM240_37_Eng

2005.5.20, 2:23 PM

18

This manual is related to the following products: