Philips MCM240-37B - Manual (Page 15)

English
15
CD/MP3-CD Operation
Notes:
CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TUNER or AUX.
– you select standby.
– the set auto off time arrives.
– no button is pressed within 15 minutes in the
CD PAUSE position.
Playing an MP3 disc
1
Load an MP3 disc.
➜
The disc reading time may exceed 10
seconds due to the large number of songs
compiled into one disc.
➜
The total number of albums and tracks (titles)
are shown.
2
Press ALBUM/TUNE а /б (or ALBUM -/
+ а /б on the remote) to select a desired
album.
3
Press PRESET н / л (or н / л on the
remote) to select a desired track.
➜ The album number will change accordingly as
you reach the first track of an album by pressing
í or the last track of an album by pressing ë.
4
Press ÉÅ to start playback.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 400 (depending on
filename length)
– Maximum album number: 40
– Supported sampling frequencies: 32 kHz,
44.1kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback. The REPEAT
modes can also be combined with PROGRAM.
SHUFFLE ......... tracks of the entire disc are
played in random order
SHUFFLE and REPEAT ALL
................................. to repeat the entire disc
continuously in random order
REPEAT ALL ... repeats the entire disc/ program
REPEAT ............ plays the current track
continuously
1
To select your play mode, press SHUFFLE or
REPEAT on the remote control before or
during playback until the display shows the
desired function. (SHUFFLE, REPEAT, REPEAT
ALL)
2
Press ÉÅ to start playback if in the STOP
position.
➜
If you have selected SHUFFLE, playback starts
automatically.
3
To return to normal playback, press the
respective
SHUFFLE or REPEAT button until
the various SHUFFLE / REPEAT modes are no
longer displayed.
● You can also press 9 to cancel your play mode.
Programming track numbers
Program in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
40 tracks can be stored in the memory.
1
Press PROGRAM to enter the programming
mode.
➜ A track number is shown and PROGRAM
flashes.
2
Use PRESET н / л (or н / л on the
remote) to select your desired track number.
➜
For MP3 CD, press ALBUM/TUNE а /б
(or ALBUM -/+ а /б on the remote) to
select your desired album.
pg001-021_MCM240_37_Eng 2005.5.20, 2:23 PM 15