beautypg.com

Radio reception – Philips MCM240-37B User Manual

Page 17

background image

English

17

Radio Reception

Tuning to radio stations

1

Press

SOURCE on the front panel of the

system or

TUNER on the remote to select

TUNER.

TUNER is displayed briefly.

2

Press

BAND on the front panel of the system

once or more to select your waveband (FM/
AM).

3

Press and hold

ALBUM/TUNE

а /б (or

ALBUM -/+

а /б on the remote).

The radio automatically tunes to a station

with sufficient reception. Display indication
during automatic tuning:

SEARCH.

4

Repeat step

3 if necessary until you find the

desired station.

To tune to a weak station, press

ALBUM/

TUNE

а /б (or ALBUM -/+ а /б on

the remote) briefly and repeatedly until you
have found optimal reception.

Programming radio stations

You can store up to a total of 40 radio stations
in the memory for each band.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.

1

Press

PRESET

н / л (or н / л on the

remote) to select the preset number where
programming should start.

Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.

2

Press

PROGRAM for more than 2 seconds to

activate programming.

AUTO is displayed and available stations are

programmed in order of waveband reception
strength: FM followed by AM. The last preset
automatically stored will then be played.

Manual programming

1

Tune to your desired station (see “Tuning to
radio stations”).

2

Press

PROGRAM to activate programming.

3

Press

PRESET

н / л (or н / л on the

remote) to allocate a number from 1 to 40 to
this station.

4

Press

PROGRAM again to confirm the setting.

The preset number and the frequency of the

preset station are shown.

5

Repeat the above four steps to store other
stations.

You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press

PRESET

н / л (or н / л on the

remote) until the desired preset station is
displayed.

pg001-021_MCM240_37_Eng

2005.5.20, 2:23 PM

17

This manual is related to the following products: