beautypg.com

Tape operation/recording – Philips MC503799 User Manual

Page 22

background image

22

English

3139 115 20751

Note:
– During rewinding or fast forwarding of a tape, it
is also possible to select another source (CD,
TUNER or AUX, for example).

General Information on
Recording

● For recording, use only tape of IEC type I

(normal tape) or IEC type II (Cr0

2

).

● The recording level is set automatically, regardless

of the position of the Volume, Incredible
Surround, BASS/TREBLE, and so forth.

● The tape is secured at both ends with leader

tape. At the beginning and end of the tape,
nothing will be recorded for six to seven
seconds.

● To prevent accidental recording, break out the

tab on the left shoulder of the tape side you
want to protect.

● If “CHECK TAPE” is displayed, the protection

tab has been broken. Put a piece of clear
adhesive tape over the opening. Do not cover
the Cr0

2

tape detection hole when covering the

tab opening.

IMPORTANT!
Recording is permissible if copyright or
other rights of third parties are not
infringed upon.

Preparation for Recording

1

Press TAPE to select tape mode.

2

Load a recordable tape into the tape deck.

3

Press í or ë to select the recording tape side.
➜ A appears on the display for the reverse
side.
➜ B appears on the display for the forward
side.

4

Press AUTO REV. on the remote control
repeatedly to select a recording mode.
➜ å for recording on one side only.

➜ ∂

∂ for recording on both sides.

5

Prepare the source to be recorded.
CD 1•2•3

– load the disc(s).

TUNER

– tune to the desired radio station.

AUX

– connect external equipment.

When recording is in progress

starts flashing.

● It is not possible to change tape side.

● It is not possible to listen to another source.

● It is not possible to activate the timer function.

One Touch Recording

1

Press CD 1•2•3, TUNER or AUX to select the
source.

2

Start playback of the selected source.

3

Press

0 REC to start recording.

To stop recording

● Press Çon the system.

Note:
– One Touch Recording is not possible in TAPE
mode, "

SELECT SOURCE" will be displayed.

Tape Operation/Recording

pg 001-030/C50-C70/37-Eng

3/7/01, 3:48 PM

22