Philips MC503799 - Manual (Page 21)

21
English
3139 115 20751
Tape Operation/Recording
- - + -
OPEN
STANDBY- ON
iR
VOL
AUX/CDR PROG
PRESET
TAPE
SEARCH/ TUNE
TUNER
DEMO STOP PAUSE
PREV NEXT
REC
STOP PLAY
BASS TREBLE
NEWS
- +
DIM
CD 1•2•3
M I C R O S Y S T E M
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape Playback
1 Press TAPE to select tape mode.
2 Press # OPEN to open the tape deck door.
3 Insert a recorded tape and close the tape door.
● Load the tape with the open side down and the
full spool to the left.
4 Press PLAYЙ (ЙЕ ) to start playback.
➜ "TAPE" with playback direction indicator will
appear on the display.
To stop playback
● Press Ç.
To change the playback side
● Press í or ë.
➜ The A (BACK) or B (FRONT) appear on
the display, depending on the tape side selected.
To change the playback mode
● Press AUTO REV. on the remote control
repeatedly to select the different playback
modes.
å : playback on one side of the tape only.
∂ : both sides are played once.
∫ : both sides are played repeatedly, up
to 10 times each side unless you pressÇ.
To rewind or fast forward during
playback
● Press and hold à or á until the desired
passage is reached, then release.
➜ The tape continues playing.
● The tape will stop automatically at the end of
the tape during rewinding or fast forwarding.
➜ During searching, the sound is reduced to a
low volume.
To rewind or fast forward when playback
is stopped
1 Press à or á.
2 Press Ç when you reached the desired passage.
pg 001-030/C50-C70/37-Eng 3/7/01, 3:48 PM 21