5 setting power save mode, Setting power save mode – Philips BDS4223V-27 User Manual
Page 47
User Manual BDS4223V
45
7.5
SETTING POWER SAVE MODE
Using OSD Menu
This monitor is equipped with a Power Save mode under RGB input
modes. When there are no signals detected by the monitor, the monitor
will automatically go into sleep mode until signal is restored.
1
Press the MENU on the monitor panel or remote control.
2
Use the SEL
or SEL
key
to select the SETUP option from the
menu.
3
Press the ADJ
key to confirm the selection.
=> Various options are available in the SETUP menu.
4
Use the SEL
or SEL
key to select the POWER SAVE option
5
Press the ADJ
key to confirm selection.
=> The POWER SAVE menu appears.
6
Use the ADJ
or ADJ
key to select the desired amount of time
to power down when no signal is detected (1MIN, 2MIN, 3MIN,
4MIN and 5MIN).
7
Press the SEL
key to confirm setting and return to previous
menu.
Note:
To turn on the monitor from sleep mode, simply follow Power On
procedure.