3 sleep timer, Sleep timer – Philips BDS4223V-27 User Manual
Page 45
User Manual BDS4223V
43
7.3
SLEEP TIMER
Setting the Sleep Timer Using the OSD Menu
This monitor has a built-in sleep timer function. Once set, the monitor
will automatically shut-off without user intervention.
1
Press the MENU button on the monitor panel or remote control.
2
Use the SEL
or SEL
key
to select the SETUP option from the
menu.
3
Press the ADJ
key to confirm the selection.
=> Various options are available in the SETUP menu.
4
Use the SEL
or SEL
key
to select the SLEEPTIMER option.
5
Press the ADJ
key to confirm selection.
=> The SLEEP TIMER menu appears.
6
Use the ADJ
or ADJ
key to change the setting (OFF, 15MIN,
30MIN, 45MIN, 60MIN, 90MIN, 120MIN).
7
Press the SEL
key to confirm setting and return to the previous
menu.
Note:
The monitor will function normally until the 1-minute mark. At the 1-
minute mark, the sleep timer will display a second by second countdown
clock to notify that you that the monitor is about to turn off.