Philips BDS4223V-27 - Manual (Page 44)

User Manual BDS4223V
42
7.2.4 USING AN EXTERNAL SUBWOOFER
Connecting a Subwoofer
This monitor is equipped with a subwoofer output to connect to an
external amplified subwoofer.
1 Connect a RCA cable from the subwoofer's input to the subwoofer's
output jack on the back of the monitor.
Notes:
● The RCA subwoofer outputs frequencies below 120Hz.
● The subwoofer output jack is governed by FIXED or VARIABLE
audio output setting and works in conjunction with AUDIO OUT
jacks.
7.2.5 FIXED / VARIABLE AUDIO OUTPUT
Setting Output Using OSD Menu
You can set the type of output this monitor outputs from its rear panel
audio output jacks. By using OSD menu, you can easily choose between
variable or fixed audio outputs.
1 Press the MENU button on the front panel or remote control.
2 Use the SEL or SEL key to select the SOUND option from the
menu.
3 Press the ADJ key to confirm the selection.
=> Various options are available in the SOUND menu.
4 Use the SEL or SEL key to select the AUDIO OUTPUT
option.
5 Press the ADJ key to confirm selection.
=> The AUDIO OUTPUT menu appears.
6 Use the ADJ or ADJ key to change the setting.
● When set to VARIABLE, audio output is affected by the
monitor's internal audio controls.
● When set to FIXED, the audio output bypasses the monitor's
internal audio controls. After achieving desired setting,
7 Press the SEL key to confirm setting and return to the previous
menu.