Behringer UMA25S - Manual (Page 20)

20
U-CONTROL UMA25S
6. Specifications
MMC Frame Rate Select:
The E13 rotary knob lets you adjust the frame rate: 24, 25, 30 (in
each case “non-drop frame”) or 30d (“drop frame”). This is an
important setting for the MMC messages, which contain defined
song positions (for example, Locate).
Factory Reset (restoring default presets):
Restoring default presets has already been described in Chapter
5.1.3.
1. In Global Mode, turn the E14 rotary knob until “FAC” (which
stands for Factory Reset) appears on the display.
2. Press the ENTER key once to reset to the factory settings.
Then, the UMA25S switches back to normal Play Mode.
Caution! With Factory Reset, all configured data and
user presets are irreversibly deleted! To avoid an
accidental deletion, save your presets by sending
a SysEx dump to your computer beforehand.
V Press the EXIT push button to cancel the Factory Reset.
Global Send Channel:
The UMA25S keyboard sends all keyboard information and control
element data, which are assigned to the GLOBAL SEND
CHANNEL over the global basis channel; the assignment takes
place by selecting the MIDI channel “c00” for a control element in
Edit Mode (see Chapter 5.4). When individual keys and control
elements are assigned to other channels (1 – 16), the GLOBAL
SEND CHANNEL has no effect on these elements.
6. Specifications
AUDIO INPUTS
MIC IN
Connectors
1/8" TRS connectors
Input impedance 5 k Ω
Max. input level +6 dBV
LINE IN
Connector
RCA connector
Input impedance approx. 27 k Ω
Max. input level 0 dBV
AUDIO OUTPUTS
LINE OUT
Connector
RCA connector
Output impedance approx. 400 Ω
PHONES
Connector
1/8" TRS connector
Output impedance approx. 50 Ω
Max. output level -8 dBV, 2 x 1.3 mW @ 100 Ω
DIGITAL PROCESSING
Converters
16-bit converters
Sampling rate 32.0 kHz, 44.1 kHz, 48.0 kHz
USB INTERFACE
Connector
Type A
Type USB 2.0; full-speed 12 Mbit/s
USB MIDI class-compliant
MIDI INTERFACE
Type
5-pin DIN connector OUT
CONTROL ELEMENTS
Controls
8 rotary knobs
1 pitch bend wheel
1 modulation wheel
1 volume slider
Buttons 8 push buttons
Pedal inputs 1 sustain, 1/4" TS connector with
automatic polarity detection
1 expression, 1/4" TS connector
DISPLAY
Type
3-digit, 7-segment LED display
SYSTEM INFORMATION
Frequency response
10 Hz – 20 kHz, ± 1 dB @
44.1 kHz sampling rate
10 Hz – 22 kHz, ± 1 dB @
48.0 kHz sampling rate
THD 0.05 % typ. @ -10 dBV, 1kHz
Crosstalk -65 dB, 1 kHz
S/N ratio A/D 88 dB typ. @ 1 kHz,
A-weighted
D/A 100 dB typ. @ 1 kHz,
A-weighted
POWER SUPPLY
USB connection
5 V _, max. 200mA
External 9 V _, max. 200mA
DIMENSIONS/WEIGHT
Dimensions
(H x W x D)
approx. 1.8" x 18.1" x 8.7"
(46 mm x 460 mm x 220 mm)
Weight approx. 4.85 lbs (2.2 kg)
BEHRINGER is constantly striving to maintain the highest professional
standards. As a result of these efforts, modifications may be made from
time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.