Philips 32PS55S - Manual (Page 31)

31
VOL
1
2
Y our remote control is set to work your TV
and many infrared remote (IR) control
VCRs, Cable Boxes, Satellite Systems, DBS,
DVD, etc. However, an easy onetime step may
be necessary before the remote will work your
VCR.
Try this initial Direct Access Method to see if
going on to the following section is necessary.
1 Place the TV/VCR/ACC Mode
Switch in the proper position.
2 Point the remote control at the device
and press the POWER button.
Does the remote turn the device ON?
If YES, stop and try other function buttons on
the remote. If they also work the device, then
the remote is ready and no further steps are
needed.
If NO, continue...
3 First look up a THREE-DIGIT remote
control number for your brand of
Device before going through the simple
steps on the following page.
Find your Three-Digit Code on
pages 35-37.
R
EMOTE
C
ONTROL
U
SE WITH
A
CCESSORY
D
EVICES
- D
IRECT
M
ETHOD
If more than one number is listed, you may
have to try more than the first Three-Digit code
given in order to locate your Device’s remote
code.
NOTE: Setting up the remote is for use with
external accessory devices only and not for use
with other television brands.
H ELPFUL H INT
Cable Converter
Satellite Receiver
VCR