Philips 32PS55S - Manual (Page 24)

24
VOL
75 ⍀ VIDEO L/ Mono AUDIO R
Monitor out COMPONENT VIDEO INPUT AV1 in
S-VIDEO Y
Pb Pr
75 ⍀
VIDEO
L/
Mono
AUDIO
R
Monitor out
COMPONENT VIDEO INPUT
AV1 in
S-VIDEO
Y
Pb
Pr
ANTENNA
OUT
ANTENNA
IN VIDEO AUDIO
IN IN
OUT OUT
L R
6
S-VIDEO OUT
1
2
3
4
5
T he S(uper)-Video connection on the rear
of the TV can provide you with better pic-
ture detail and clarity for the playback of
accessory sources such as DBS (digital
broadcast satellite), DVD (digital video
discs), video games, and S-VHS VCR (video
cassette recorder) tapes than the normal
antenna picture connections.
NOTE: The accessory device must have an
S-VIDEO OUT(put) jack in order for you to
complete the connection on this page.
1 Connect one end of the S-VIDEO
CABLE to the S-VIDEO jack on the
back of the TV. Then connect one end
the AUDIO (red and white) CABLES
to the AV1 in AUDIO L and R(left and
right) jacks on the rear of the TV.
2 Connect other end of the S-VIDEO
CABLE to the S-VIDEO OUT jack on
the back of the VCR. Then connect the
other ends of the AUDIO (red and
white) CABLES to the AUDIO (left
and right) OUT jacks on the rear of the
VCR.
3 Turn the VCR and the TV ON.
4 Press the CH + or – buttons on the
remote to scroll the channels until AV1
appears in the upper left corner of the
TV screen.
5 Slide the TV/VCR/ACC switch to the
VCR position.
6 Now your ready to place a prerecorded
video tape in the VCR and press the
PLAY
ᮣ button.
U
SING THE
S-V
IDEO
I
NPUT
J
ACKS
The S-VIDEO and VIDEO AV1 in(puts) are
in parallel. The S-VIDEO input is domi-
nant when in use. If separate video signals
are connected to the S-VIDEO and VIDEO
AV1 in(puts), the signal from the VIDEO
AV1 in(put) will not be usable.
H ELPFUL H INT
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH
S-VIDEO JACKS)
S-VIDEO
CABLE
BACK OF VCR
IF YOU ARE USING A MONO DEVICE, USE
ONLY THE AUDIO L/MONO JACK. IF A
DUMMY JACK IS PLUGGED INTO THE
AUDIO R, NO SOUND WILL BE HEARD.