Philips 32PS55S - Manual (Page 22)

22
VOL
75 ⍀ VIDEO L/ Mono AUDIO
R
Monitor out COMPONENT VIDEO INPUT AV1 in
S-VIDEO Y
Pb
Pr
75 ⍀
VIDEO
L/
Mono
AUDIO
R
Monitor out
COMPONENT VIDEO INPUT
AV1 in
S-VIDEO
Y
Pb
Pr
ANTENNA
OUT
ANTENNA
IN
VIDEO AUDIO
IN IN
OUT OUT
L R
6
1
2
3
4
5
T he TV’s Audio/Video Input jacks are for
direct picture and sound connections
between the TV and a VCR (or similar acces-
sory device) that has Audio/Video Output
jacks. These jacks are GOLD plated for the
best possible signal transfer.
1 Connect one end of the VIDEO (yel-
low) CABLE to the AV1 in VIDEO
jack on the back of the TV. Then con-
nect one end the AUDIO (red and
white) CABLES to the AV1 in AUDIO
L and R(left and right) jacks on the
rear of the TV.
2 Connect other end of the VIDEO
(yellow) CABLE to the VIDEO OUT
jack on the back of the VCR. Then
connect the other ends of the AUDIO
(red and white) CABLES to the
AUDIO (left and right) OUT jacks on
the rear of the VCR.
3 Turn the VCR and the TV ON.
4 Press the CH + or – buttons on the
remote to scroll the channels until AV1
appears in the upper left corner of the
TV screen.
5 Slide the TV/VCR/ACC switch to the
VCR position.
6 Now your ready to place a prerecorded
video tape in the VCR and press the
PLAY
ᮣ button.
U
SING THE
A
UDIO
/V
IDEO
I
NPUT
J
ACKS
AUDIO IN
(RED/WHITE)
VCR
(EQUIPPED WITH
VIDEO AND AUDIO
OUTPUT JACKS)
VIDEO IN
(YELLOW)
BACK OF VCR
IF YOU ARE USING A MONO DEVICE,
USE ONLY THE AUDIO L/MONO JACK. IF
A DUMMY JACK IS PLUGGED INTO THE
AUDIO R, NO SOUND WILL BE HEARD.